Eurotech PCN-1001, User Manual

Page: 9 / 118

Important
user information PCN-1001 User manual
9
PCN-1001_UserMan_En_4.0
Installation
WARNING!
• Verify that the mounting location can withstand the added loads caused by the addition of the
device, it should be firmly secured so that it will not cause any potentially hazardous
situations (e.g. falling down due to vibration or shock)
•
Do not operate the device near heat sources or flames.
NOTE:
If the device must be moved from one place to another with different ambient temperatures, ensure sufficient
time for the temperature of the device to stabilize before repowering.
Ventilation
WARNING!
Ensure adequate ventilation to avoid overheating, Eurotech suggests the following steps:
• When installing the device within a cabinet, rack or other enclosed space, be sure to leave
sufficient space to allow adequate air circulation
• Do not block any ventilation openings
Maintenance
DANGER!
•
Never open, dismantle or repair the device!
• For your maintenance or repair requirement please contact a qualified Eurotech engineer.
If the device does not function correctly and you are unable to find a solution, feel free to contact
the Eurotech Technical Support Team.
If the equipment does not work properly, especially if smells unusual, unplug it immediately and contact Technical
Support Eurotech (see fourth cover of this manual for details).
Cleaning
WARNING!
When cleaning the device, remember to:
• Ensure sufficient ESD protection during the cleaning process
• Remove any power from the device
• Use a dry cloth to remove dust and fingerprints from the external casing
• Do not use detergents, aerosol sprays, solvents or abrasive sponges
To clean the lenses:
1. Use a blower to remove any dust
2. Use water-based, non-flammable, glass/plastic cleaner products to remove all types of
dirt; grease, oil, nicotine etc. from the lenses
3. Gently wipe the lenses with a lint-free cloth.
WARNING!
The PCN-1001 should not be used for extended periods of time with the service plate removed.
Doing so can cause dust and other particulates to enter the system thus causing degradation to the
optics.
If it is necessary to have extended access to the Mini-USB connector, take appropriate precautions
to stop any particulates from entering.