R
ASSEMBLY INSTRUCTION
Remove all items from the carton.Verify all pieces before assembly
PART LIST
1
5
Caster
9
4
Mechanism Screws
11
4
Armrest Screws
2
1
Base
(5/16
”x3/4”)
(1/4
”x1-3/4”)
3
1
Gas Lift
4
1
Telescopic Cover
Shown Actual Size
Shown Actual Size
5
1
Mechanism
Armrest Screws
12
4
Bracket Screws
6
1
Seat Cushion
10
2
(1/4
”x1-1/4”)
(5/16
”x1-1/2”)
7
1
Back Cushion
8
2
Armrest
13
1
Allen Wrench
Shown Actual Size
Shown Actual Size
STEP 1:
STEP 2:
4
13
10
11
3
2
8
6
NOTICE:
1
THERE ARE TWO DIFFERENT SCREW SIZES TO
ATTACH THE ARM. USE SCREW (10) FOR INNER
HOLES; USE SCREW (11) FOR OUTER HOLES.
STEP 3:
STEP 4:
13
9
13
5
12
6
7
NOTICE:
FOR EASY ASSEMBLY, FIRST
ATTACH ALL SCREWS BY HAND;
THEN USE THE ALLEN WRENCH
TO TIGHTEN ALL SCREWS.
B
A
MECHANISM OPERATION
INSTRUCTION WHILE SEATED:
(A) SEAT HEIGHT ADJUSTMENT:
Pull lever up. Release lever when
desired position is reached.
(A)
BACK TILT ADJUSTMENT:
Pull lever outward to allow backward tilt; Push
lever inward to lock back in vertical position.
(B) TILT TENSION ADJUSTMENT KNOB:
Rotate knob clockwise/counterclockwise to
adjust tilt tension based on body weight.
PREVENTIVE MAINTENANCE AND WARNING!
· USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME.
· DO NOT USE THIS CHAIR AS A STEP STOOL/LADDER.
· DO NOT SIT ON ANY PART OF THE CHAIR EXCEPT THE SEAT.
· DO NOT USE CHAIR ON UNEVEN FLOOR SURFACES.
· DO NOT USE CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS
ARE TIGHT.
·
AT LEAST EVERY SIX MONTHS, CHECK ALL BOLTS, SCREWS
AND KNOBS TO BE SURE THEY ARE TIGHT.
· IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN,
STOP USE OF THE PRODUCT UNTIL REPAIRS ARE MADE USING
FACTORY AUTHORIZED PARTS.
· DISPOSE OF PACKAGING PROPERLY, PLASTIC BAG IS NOT A TOY. DO NOT
USE PLASTIC BAG AS HEAD COVERING. IT MAY CAUSE SUFFOCATION.
· FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN
SERIOUS INJURY.