Eurotech DynaGATE 20-30 Series, User Manual

Page: 67 / 76

DynaGATE 20-30 User manual Rev. 0-7 12 How to install the product
12 H
OW TO INSTALL THE PRODUCT
The product is intended for professional use and must be installed by qualified personnel only.
The product must be installed in a secured location, accessible to authorized personnel only (for
example in a cabinet / technical compartment).
To install the product in place, complete the following steps:
1. See "Mechanical specifications and dimensions" on page 65
2. Use the 4 slots available on the enclosure
3. Add all the necessary mounting hardware to safely fasten the DynaGATE 20-30 in place according
to your installation requirements (for example use 4x M5 screws, with a minimum length of 15 mm).
Material, type, and length of the screws, and the maximum torque applicable, depend on
your installation requirements.
In case of uncertainties contact the Eurotech Technical Support Team (see "How to receive
technical assistance" on page 17 ).
67 / 76