Winner Analog GSM Fax User Manual
www.eurotech-communication.com
8
4
. Maximum Digits: Maximum number of digits to be dialed
This parameter allows the user to specify the maximum number of digits to be dialed for any valid outgoing
call.
1)
Press
"*"
to reach the sub menu. The LCD will indicate "# - Change / * -Exit". After about a
second the LCD display will change to: "Max: O9 ".
2)
Press "#" in order to modify this value. LCD will display "Max: (O5-2O)" (for about1 sec). Choose a
number between O5 to 2O (2digit number).
3)
Press "*" to accept and exit.
Note:
When the “Maximum Digits” number is reached during dialing, the call will go out immediately,
regardless of any superfluous dialing.
5. Inter Digit Timer
The interval between the end of your dialing sequence and the moment the call goes out.
This parameter is in multiplications of 5Oms (milli seconds).
4)
Press
"*"
to reach the sub menu. The LCD will indicate:
"# - Change / * - Exit
”. After about a
second the LCD display will change to: "
50msX200
".
5)
Press
"#"
in order to modify this value. LCD will display (for about 1 sec): "
50msX(001-200)
".
Choose a number between OO1 to 2OO (3 digit number).
6)
Press
"*"
to accept and exit.
Note:
When you have finished dialing, the call will go out after the “Inter Digit timer” delay (menu
parameter No. 5) but only if the number of digits dialed is between “Minimum Digits” and “Maximum
Digits”.
If “Minimum Digits” is less than O2, no call will go out.
If “Maximum Digits” is reached during the dialing sequence the call will go out immediately, regardless of
any superfluous dialing.
6. Ignore First Digit
This parameter allows you to ignore the first dialing digit:
1)
Press
"*"
to reach the sub menu, the LCD will indicate "
# - Change / * - Exit
". After 1 second the
LCD will display: "
Digit:
".
2)
Pressing
"#"
until LCD shows the digit that you need to ignore.
3)
Press
"*"
to choose and exit.