Winner Analog GSM Fax User Manual
www.eurotech-communication.com
7
3)
To scroll between options in the sub menu press "
#
", to choose an option press "
*
".
Available signal types (Sub Menu Items):
Battery Reversal. (Polarity reverse)*
Disable
Double Line Reverse
Break Line
* Polarity reverse timing (Pulse Duration can be programmed using menu parameter 2) “Answer
Supervision Timer”.
Notes:
1. The “Off Hook Signal” is determined by your type of PBX.
2. If you are using a CDR (Call Detail Record) unit, use “Double Line Reverse” as your preferred
option.
2. Answer Supervision Timer: Modify “Off Hook Signal” Pulse Duration
This parameter is in multiplications of 100ms (milliseconds) (see your PBX documentation for the correct
value).
1)
Press "
*
" to reach the sub menu. The LCD will display
"# - Change / * - Exit"
.
2)
After 1 second the LCD will display: "100msX" (100ms times 1).
User can change the multiplication value by pressing "#". LCD will display (for about 1sec):
"
0-9 –Edit / * - Exit
".
3)
Choose a new multiplication factor by pressing OO – O9 (2 digit number).
4)
Press
"*"
to accept new value and exit.
3. Minimum Digits: Minimum number of digits to be dialed
This parameter allows the user to specify the minimum number of digits to be dialed for any valid
outgoing call.
1)
Press
"*"
to reach the sub menu. The LCD will indicate "
# - Change / * - Exit
". After about a
second the LCD display will change to: "Min: O7".
2)
Press
"#"
in order to modify this value. LCD will display
"
Min:
(02-08)
" (for about 1 sec). Choose a number between O2 to O8 (2 digit number), press
"*"
to accept and exit.
Note:
When you have finished dialing, the call will go out after the “Inter Digit Timer” delay (menu parameter No.
5) but only if the number of digits dialed is between “Minimum Digits” and “Maximum Digits”.
If “Minimum Digits” is less than O2, no call will go out.