Winner Analog GSM Fax User Manual
www.eurotech-communication.com
6
4)
To receive a Fax, press the following sequence on your fax machine:
If you are not in fax mode then press ** # 01 # , the unit will turn to FAX mode.
When the fax is being received the unit will show the following sequence – Incoming Fac call, Init.
GSM Fax.
RM FAX TO MEMORY (the fax that’s being sent to you is stored into the unit’s memory).
MEMORY TO LC FAX (the fax has been transferred from the unit’s memory to your fax machine).
Note
In case the receiving fax machine is
busy
, the unit will store the fax being sent to it’s memory. In order to
re-send the fax you will have to press
** # 03 #
at your convenience. The unit will show you the following –
For example: FAX: 002% 1 PG
** # 03 # to send
When a new fax is being received or sent, it will overwrite the current fax which in memory.
3.3.
STAGE 3: SETTING DATA MODE
To set Data Mode:
1)
In order to send or receive data,(Data Mode has to be on enable at menu 11 in programming mode, see
DTMF programming), press the following sequence on your fax machine:
* # 01 #..
2)
After the COM PORT cable to is connected to PC the following massage will appear on the LCD :
Data
Mode RS- 232 Connection
.
In order to revise to VOICE Mode again, Please press: **#OO#
3.4.
STAGE 4: DTMF OPERATION PARAMETERS MENU
To enter programming mode:
1)
Pick up the handset of the landline phone and press the star key 3 times " * * * ".
2)
LCD will indicate "Programming Mode" ( it is now in programming mode).
(after 1 second the LCD will display the first parameter: "1. AnsSuperVision ").
3)
In order to scroll through the "Programming Options" 'parameter menu' press "#".
4)
To enter any sub menu press "*".
3.4.1.
PARAMETER MENU
1. Answer Supervision (AnsSuperVision) - Off Hook Signal type
This parameter allows the user to specify the type of signal sent to the PBX when the phone handset is
lifted off the cradle. This signal is PBX specific so check your PBX documentation and pay attention to the
notes at the bottom.
1)
Press "
*
" to enter the sub menu options. The LCD will display
"# - Choose / * - Save".
2)
After 1 second the LCD will display "Battery Reversal" (first item in the Sub Menu).