Winner Analog GSM Fax User Manual
www.eurotech-communication.com
10
If this option is active (ON) and your PBX Supports this service, the caller ID will be sent to the target
extension, (Caller I.D. will always appear on your LCD - with or without this option).
11. PIN Number:
1)
Press "*" to reach the sub menu, the LCD will indicate "# - Change / * - Exit". After a short delay the
LCD displays: "PIN: XXXXXX".
2)
Press "*" to accept the existing No. and exit to the parameter menu.
3)
Press ’#’ to add a new PIN number or change the current PIN No. "NEW PIN:" will be displayed Key in a
PIN number (max 8 digits) using the telephone keypad.
4)
Press ’*’ to accept the PIN number and exit to the parameter menu.
12. CLIR Mode:
(CLIR – ClearCaller ID).
1)
Press "*" to reach the sub menu, the LCD will indicate "# - Change / * - Exit".
2)
Scroll through the Sub Menu options using "#".
3)
Press "*" to accept the option in the display and exit to the parameter menu.
Available options:
1. By Network: According to cellular network
2. Invocation: Inactives ID display
3. Suppression: ID will be displayed
13. Voice Gain:
Volume of Caller or Receiver voice.
1)
Press "*" to reach the sub menu, the LCD will indicate "# - Change / * - Exit".
2)
Scroll through the Sub Menu options using "
#
".
3)
Press "
*
" for 3 secs in order to change volume setting (3 digits).
4)
Press "
*
" to accept the option in the display and exit to the parameter menu.
Options:
Rx gain – Incoming voice Volume Control
Tx gain - Outgoing voice Volume Control
14. RX DTMF Restoration:
Correcting the reception DTMF signal.
Options for the length of the signal restoration:
1)
Enable
2)
Short
3)
Long
4)
User (See section 16 – DTMF Restoration Timers)
15. TX DTMF Restoration:
Correcting the transmission DTMF signal.
Options for the length of the signal restoration:
1)
Enable
2)
Short
3)
Long
4)
User (See section 16 – DTMF restoration timers)