E.u.r.o.Tec GmbH
•
Unter dem Hofe 5
•
D-58099 Hagen
Tel. +49 2331 62 45-0
•
Fax +49 2331 62 45-200
•
www.eurotec.team
ASSEMBLY INSTRUCTIONS
DRILL TOOL 50X
Deck construction and landscaping
Page 1 of 2
© by E.u.r.o.Tec GmbH · Last updated 03/2022 · Subject to changes, additions, typesetting and printing errors.
INSTALLATION
Position the plank on the substructure. Depending on the wood
type, it may be necessary to keep a distance between the plank
and the substructure (TENAX spacer, EPDM band 3 mm, etc.).
The advantages of the procedure are better back ventilation
and the prevention of waterlogging.
Position the drill tool on the plank in alignment with the
substructure.
For any type of wood, the mounting points should be
pre-drilled using a step drill (3.3 mm to 4.5 mm).
1
2
3
