Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 10
Fill the spa with warm water. It is not
recommended that the water temperature
exceeds 100 degrees F.
Fill the tub with water to the wavy line on the
tub wall.
The on/off button is located underneath the
footrest. Push it once to start the spa, push
it again to stop the spa.
Adjust the pressure of the jets by turning the
round adjusting cover on each jet. To adjust
the direction of the water flow, move the jet
eyeball located in the center of the jet
assembly.
7
6
5
8
