Hang the device first from the bottom side and
rotate it backwards until it clicks into place
(make sure it is in place)
CHARGE THE BATTERY
Ideally, recharge the battery before each use,
especially after an extended period of shutdown.
This increases the battery life and ensures the
longest possible cleaning cycles.
Connect the supplied power supply to the power
outlet
The LEDs on the handle start to flash / light up in
blue. The more LEDs light up, the more advanced
the charging process (one LED = 30%, two LEDs
= 65% and three LEDs = 100% charge)
All LEDs light up when the battery is fully
charged. Charging the empty battery takes
approx. 4 hours
Unplug the power supply from the power outlet
TIP: When the battery is fully charged, the
usage time is approx. 25-40 minutes
VACUUM WITH THE FLOOR TIP
CAUTION! Check the device for damage
before each use. Do not use a damaged device.
Risk of injury !
WARNING! Use only tips in perfect condition.
Damaged tips can damage surfaces or objects
TIP: It is also possible to use the floor nozzle
without the suction tube, p. ex. to vacuum the
furniture
Ensure that the surface resists the stress exerted
by the cylindrical brush, without being damaged
Always turn off the device before installing or
replacing accessories
Vacuum hard floors
Attach the floor nozzle to the suction tube. Then
mount the tube on the device
Press the ON / OFF key to switch on the
appliance (the blue light comes on)
With the speed switch (9), the speed can be
changed between two options
Vacuum the floor
Raise the nozzle from the ground
TIP: Once the floor nozzle has been fitted, the
appliance starts up with the brush roller running
Empty and clean the dust container. (See
chapter "Cleaning")
Vacuum carpets or rugs
TIP: With the floor nozzle, vacuuming is only
possible on rugs and low pile carpets
Make sure that the surface resists the stress
exerted by the cylindrical brush, without being
damaged
Press the ON / OFF key to switch on the
appliance
Vacuum the floor
Press the ON / OFF key to stop the appliance
Empty and clean the dust container (see
"Cleaning")
Vacuum with accessories
TIP: It is also possible to use the accessories
without the suction tube, p. ex. to vacuum the
furniture
Attach the desired nozzle to the suction pipe or
directly to the device
Padding tip for cushion, with rotating brush
End cap for grooves suitable for angles, edges,
and slots. The built-in brush can be pushed
forward. Prevents scratches on sensitive surfaces
