13. Dust bin with "HEPA H12" and metal
protection filter
14. Cover with rubber seal
15. Dust bin opening button
16. Wall / floor fixing
17. Accessory fixings (2x)
18. Connection for charger
19. Brush attachment
20. Groove end brush (sliding)
21. Upholstery nozzle (swivel brush)
22. Unlock button
23. Charger cable / device
BEFORE THE FIRST START-UP
WARNING! Be extremely careful, as improper
handling of electric current can be fatal. Please
read the safety instructions on page 01 carefully
and observe the following safety rules:
Only use the vacuum cleaner in dry rooms
Do not vacuum up any liquid, such as water, etc.
Do not pick up sharp, sharp, burning, or
incandescent objects (such as shards, needles,
cigarettes, hot ashes, etc.)
Empty the dust container when it is full
Never vacuum toner dust (from the printer,
copier) or very fine dust particles (cement,
plaster, ash, site etc.)
Never vacuum without a motor protection filter
Before the first start-up, mount the binding and
charge the battery.
USE
The device allows easy and fatigue-free dusting.
Thanks to the highly efficient and washable "HEPA
H12" filter, the finest particles of dust are retained
in the device, keeping your home free from harmful
allergens and particles.
FIT THE FIXING
The support can be screwed to the wall or
placed on the floor.
Keep the wall support aligned vertically with
respect to the wall (Release button (22) facing
upwards)
Mark the holes in the dowels with a pencil
Drill the holes (approx. 6 mm Ø)
Put the plugs provided in the holes
Hang the charger cable in the side hook
Secure the wall mount with the screws provided.
Do not clamp or pinch the cable
Operation
