8
TThhee eeyyeesshhaaddeess ((ooppttiioonnaall))
The eyepieces can be equipped with optional rubber eyeshades. They prevent damage to the eyepiece and prevent
stray light. The eyeshade can simply be slipped over the eyepiece
Connecting the power adapter
The MicroBlue series supports a wide range of operating voltages: from 100 to 240V. Please use a grounded power
connection
1.
Make sure the power switch is off before connecting
2.
Insert the connector of power cord into the MicroBlue power socket, and make sure it connects well
3.
Insert the other connector of the adapter into the mains socket, and make sure it connects well
D
Doo nnoott bbeenndd oorr ttw
wiisstt tthhee ppoow
weerr ccoorrdd,,
it will be damaged. Use the power cord that is supplied by Euromex. If it is lost or
damaged, choose one with the same specifications
Operation
Setting up the illumination:
For optimal contrast and resolution one should follow the
procedure below:
A.
Place a specimen on the object stage and focus, using the
4x objective, with a fully opened iris diaphragm
B.
Turn light intensity to lowest position, then look through
the eyepiece(s) and turn up to the comfortable light
intensity level
C.
Turn the condenser in the highest position
D.
Close the iris diaphragm, until it is just visible on the edge
of the field of view
The microscope is properly set for use with the 4x objective. For
each other magnification in bright field use, this procedure should be repeated to ensure the best balance between
contrast and resolution
CCaauuttiioonn
:
The maximum light intensity when using the 4x and 10x can damage the eyes!
8
