12
Maintenance of the stand
Dust can be removed with a brush. In case the stand or table is really dirty then you can clean the surface with a non-
aggressive cleaning product
Moving parts, like mechanical stage, contain ball bearings that are not dust sensitive. With a drop of sewing-machine oil
you can lubricate the bearing
Changing the batteries of the MicroBlue
CCaauuttiioonn::
Always remove the power cable from the mains supply!
•
Open the small lid at of the bottom cover of the microscope by unscrewing the chrome screw
•
Open battery compartment with small Philips screwdriver
•
(Re)place the batteries and put the lid back into its place
13
Digital models and cameras
Digital models are equipped with a build in digital camera. Connect the supplied USB cable to camera and follow the
dedicated software manual for use. The LED wich is placed beside the USB port will start to blink when activated in the
software
M
MO
ODDEELLSS
DDiiggiittaall
LLCCDD
DDiiggiittaall
m
moonnoo
11..33
M
MPP
55..00
M
MPP
M
Maaxxiim
muum
m
oobbjjeeccttiivveess
44//1100//SS4400xx
oobbjjeeccttiivveess
SS6600xx
oobbjjeeccttiivvee
SS110000xx
oobbjjeeccttiivvee
M
Meecchhaanniiccaall
XX--YY ssttaaggee
LLEEDD
BBaatttteerriieess
MB.1001-LCD*
••
33
••
••
••
MB.1051-LCD*
••
44
••
••
••
••
MB.1005-1
••
••
33
••
••
••
MB.1005-5
••
••
33
••
••
••
MB.1055-1
••
••
44
••
••
••
••
MB.1055-5
••
••
44
••
••
••
••
MB.1655-1
••
••
44
••
••
••
••
••
MB.1655-5
••
••
44
••
••
••
••
••
MB.1155-1
••
••
44
••
••
••
••
••
MB.1155-5
••
••
44
••
••
••
••
••
* models with LCD-screen
Digital cameras are designed to be used on the
photo port of the microscope head. It is also
possible to use the digital camera in combination
with a monocular or binocular head. Simply
remove the eyepiece and place the camera with
mounted c-mount adapter into the eyepiece
tube (see image below). Focus the digital image
with the coarse and fine controls of the
microscope
For trinocular models, slide the camera with mounted c-mount adapter into the 23,2mm tube of the photo tubus. For
focussing; loosen the ring (A) and slowly unscrew the tube (B) you will be able to match parfocality of the camera with
the view through the eyepieces. Adjustment can be made by raising/lowering the height of the camera (C). Take an
easy-to-view specimen and focus the image through the microscope’s eyepieces (with dioptre adjustment set on “0”).
Afterwards, perform this height adjustment procedure while watching the image on the computer screen. In this case,
once you have obtained parfocality in the device, screw the ring (A) back (see image below)
Follow the manual that comes with the camera for camera operation
13
