EuroLite TMH XB-280, User Manual

Page: 32 / 40

00127924, Version 1.0 32/40
The functions provided are described in the following sections.
Default settings shaded.
Main menu Sub menu Function
Set
Run mode
DMX/Sound/Random/
Auto 1, Auto 2 DMX mode / music control / random auto
program / auto program 1 and 2
DMX address 001~ 512 DMX address setting
Channel mode 16 CH / 19 CH Number of DMX channels
Invert PAN ON/OFF
Reverse movement
Invert TILT ON/OFF
PAN-TILT Swap ON/OFF PAN-TILT swap
PAN-TILT Encoder ON/OFF Automatic PAN/TILT adjustment
DMX signal Keep/clear Action if no DMX
Lamp on ON/OFF Lamp on by power on
Linear color ON/OFF Switch color change from step to linear color
Load default OK/Cancel Restore factory settings
Manu PAN ... PAN = XXX ... Test function
Sys
DIS T105B-L.191119 Software Version: Display
MT
L.191119
Software Version: PCB
Reset Cal Calibration to standard position
Sensor Monitor Only service function for producer
System errors Error message
DMX monitor
Current DMX address of the channels
Lamp Hours *
Operating hours of the illuminant
Total lamp Hours
Total operating hours of the device
* = To reset the operating hours of the illuminant to 0, set the DMX address to 256 and press the Enter
button for 5 seconds.
Set
Run Mode
DMX mode
This mode allows the unit to be controlled via any standard DMX controller.
Sound
With this function, you can run the internal program sound-controlled.
Random auto mode
With this function, you can run the random internal program.
Auto mode (Auto 1+2)
With this function, you can run 2 different internal programs.
DMX address setting
With this function, you can adjust the desired DMX address via the Control Board.
Number of DMX channels
With this function, you can display the desired DMX channel mode.
Invert PAN
With this function, you can reverse the PAN-movement.
Invert TILT
With this function, you can reverse the TILT-movement.
PAN-TILT Swap
With this function, you can swap PAN and TILT.