00035972.DOC, Version 1.1
17/29
DMX protocol
Channel 1 – Snow volume
DMX-value:
Volume (%)
0 - 255
Gradual adjustment of the snow volume from 0 to 100 %
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer. Should
you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
1350 W
DMX control channels:
1
DMX512 connection:
3-pin XLR
Snow output:
120 ml/min.
Tank capacity:
2.5 litres
Fluid-consumption:
10 l/h
Dimensions (LxWxH):
510 x 330 x 355 mm
Weight:
11 kg
Fuse:
F 8 A, 250 V
Accessory:
EUROLITE Snow fluid, 5L
No. 51706350
Safety bond AG-15 4x1000mm up to 15kg
No. 58010364
Please note: Every information is subject to change without prior notice. 26.05.2010 ©
