00103656, Version 1.0
34/36
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
100-240 V AC, 50/60 Hz ~
Power consumption:
80 W
DMX control channels:
45/21/12/8
DMX512 connection:
3-pin XLR
Sound-control:
via built-in microphone
Flash-rate:
13 Hz
LED type:
8 W QCL, RGBW
Number of LEDs:
8
Maximum TILT-movement:
unlimited
Beam angle (single-color beam):
1°
Dimensions (LxWxH):
629 x 106 x 181 mm
Weight:
6 kg
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
C
(steady state):
60° C
Min. distance from flammable surfaces:
0.5 m
Min. distance to lighted object:
0.1 m
Fuse:
T 2 A, 250 V
Accessory:
EUROLITE TPC-10 Coupler, silver
No. 59006856
EUROLITE TPC-10 Coupler, black
No. 59006858
EUROLITE Safety bond A 4x1000mm up to 15kg silver
No. 58010320
EUROLITE Safety bond A 4x1000mm up to 15kg black
No. 58010344
EUROLITE DMX cable XLR 3pin 3m bk
No. 3022785H
PSSO DMX cable XLR 3pin 3m bk Neutrik
No. 30227810
SOMMER CABLE DMX cable XLR 3pin 3m bk Hicon
No. 30307457
SOMMER CABLE DMX cable XLR 3pin 3m bk Neutrik
No. 3030746Z
Summary of Contents for MSB-8i
Page 1: ......
