00103656, Version 1.0
33/36
41
Red 8
0
255 00 FF 0% 100%
F Red 0 - 100 % increasing
42
Green 8
0
255 00 FF 0% 100%
F Green 0 - 100 % increasing
43
Blue 8
0
255 00 FF 0% 100%
F Blue 0 - 100 % increasing
44
White 8
0
255 00 FF 0% 100%
F White 0 - 100 % increasing
45
21
12
8
Reset
0
250 00 FA 0%
98%
S No function
251 255 FB FF 98% 100%
S Reset
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The cooling-fan should be cleaned monthly. The interior of the fixture should be cleaned at least annually
using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Summary of Contents for MSB-8i
Page 1: ......
