00021873.DOC, Version 1.0
18/22
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
A skilled person has to approve the flying construction before every use. This approval includes appearance
and load tests when moved.
Procedure:
The installation should be attached outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material. If you lack these qualifications, do not attempt the installation yourself, but instead use a
professional structural rigger. Improper installation can result in bodily injury and/or damage to property.
The installation has to be attached out of the reach of people.
Make sure that the projectors' minimum distance from lighted objects (symbol
- - -m
) and the maximum
ambient temperature
t
a
are never exceeded at the installation spot.
Caution:
The loads have to be installed in a balanced way.
Install the luminaries on the fundamental part and do always install a safety-rope that can hold at least 12
times the weight of the fixture. You must only use safety-ropes with screw-on carabiners. Pull the safety-rope
through the attachment eyelet on the rear panel of the device and over the light bar or a safe fixation spot.
Insert the end in the carabiner and tighten the safety screw.
Max. loads:
