00105348, Version 1.1
54/56
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The cooling-fan should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuse-holder with a fitting screwdriver from the housing (anti-clockwise).
Step 2:
Remove the old fuse from the fuse-holder.
Step 3:
Install the new fuse in the fuse-holder.
Step 4:
Replace the fuse-holder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
100-240 V AC, 50/60 Hz ~
Power consumption:
450 W
Protocol:
Art-Net 3
Signal port:
2 x RJ45 (Ethernet)
DMX control channels:
13/24/88/113
DMX512 connection:
5-pin and 3-pin XLR
Flash-rate:
20 Hz
Number of LEDs:
25
LED type:
12-W-COB, RGBW
Maximum PAN-movement:
unlimited
Maximum TILT-movement:
unlimited
Beam angle:
7.5-60°
Dimensions (WxDxH):
415 x 310 x 535 mm
Weight:
16.5 kg
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
C
(steady state):
55° C
Min. distance from flammable surfaces:
0.5 m
Min. distance to lighted object:
0.1 m
Fuse:
T 4 A, 250 V
Summary of Contents for LED TMH-X25 Zoom
Page 1: ......