00105348, Version 1.1
40/56
Control Board
The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or make a reset.
The main menu is accessed by pressing the Menu-button. Browse through the menu by pressing the
direction buttons up, down, left and right. Press Enter in order to select the desired menu. You can change
the selection by pressing the direction buttons. Press Enter in order to confirm. You can leave every mode by
pressing the Menu-button. The functions provided are described in the following sections.
Default settings shaded.
Main menu
Sub menu
Display
Function
Address
Address 001-XXX
DMX address setting
In
fo
rm
a
ti
o
n
DMX Value
PAN ...
XXX
DMX indicator
LED Temperature
XXXC/F
Inside temperature
Fixture Hours
Current Hours
XXXX (h)
Power on running time
Total Hours
XXXX (h)
Fixture running time
Last Hours
XXXX (h)
Last power on time
Ethernet IP
X.X.X.X
X.X.X.X
IP Address
Subnet mask
Software Version
VX.X.XU
Software version
O
p
ti
o
n
C
o
n
fi
g
Pan Tilt
Pan Reverse
ON/OFF
Reverse movement
Tilt Reverse
ON/OFF
Pan-Degree
540/630
Select PAN-angle
630° or 540°
Encoder
ON/OFF
Automatic PAN/TILT
correction; target position
Service
Password
XXXX
Password Code=123
IP Address
Manual Set
Art-Net On IP2
Art-Net On IP10
Adjust IP address
IP Mask
X.X.X.X
Adjust subnet mask
Universe
OFF,1-255
Select universe
LED Address
1 - 512
Adjust LED address
Source Select
DMX Only
Art-Net
DMX&Art-Net
Select used controller
type
Display
Shutoff
2-60m
Display-Abschaltung
Reverse
ON/OFF
Display-Umkehrung um
180°
Lock On
ON/OFF
Key lock activation
Temperature C/F
Celsius
Fahrenheit
Select temperature
designation °C or °F
Reset Default
ON/OFF
Reload Default
Summary of Contents for LED TMH-X25 Zoom
Page 1: ......