00128934, Version 1.0
31/36
DMX operation
Setting the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 17 control channels. To be
able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller’s documentation.
1
Press the arrow button left or right to enter the mode menu.
2
Select
SET
with the arrow button up or down.
3
Press the OK button twice..
4
Use the arrow button up or down to select
DMX Address
and press the
OK
button to confirm.
5
Use the arrow button up or down to set the DMX starting address. Confirm your setting by pressing the
OK button.
6
When DMX control signals are received, the DMX control indicator lights up.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Functions in DMX mode
Channel
Value
Feature
1
Horizontal movement (PAN)
0
255
Push slider up in order to move the mirror horizontally (PAN). Gradual mirror adjustment
from one end of the slider to the other (0-255, 128-center). The mirror can be stopped at
any position you wish.
2
PAN-movement with 16-bit resolution
0
255 Fine indexing
Farbrad / color wheel
Rotierendes Goborad / rotating gobo wheel
Statisches Goborad / static gobo wheel
Weiß/
White
Rot/
Red
Grün/
Green
Blau/
Blue
Orange/
Orange
Violett/
Purple
Gelb/
Yellow
Pink/
Pink
Hellgrün/
Light green
Hellblau/
Light blue
Summary of Contents for LED TMH-S200
Page 1: ......
Page 2: ...00128934 Version 1 0 2 36...
