00113093, Version 1.0
22/28
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.
Menu structure
The main menu is accessed by pressing Menu until the display is lit. Browse through the menu by pressing
Menu. Press Enter in order to select the desired menu. You can change the selection by pressing Up or
Down. Press Enter in order to confirm. You can leave every mode by pressing Menu. The functions provided
are described in the following sections.
Mode
Display
Function
DMX mode
Addr
A001~ A512
Start address
CHnd
16 CH
16-channel mode
18 CH
18-channel mode
Master/slave mode
SLnd
SL 1
Slave mode 1
Synchronous movement
SL 2
Slave mode 2
Asynchronous movement
Auto
Auto mode
Sound
Sound control
Auto mode
SHnd
SH 0
Program 0
SH 1
Program 1
SH 2
Program 2
SH 3
Program 3
Microphone sensitivity
for sound control
SEnS
0-100
Microphone sensitivity low > high
No DMXs ignal
bLnd
blAC
Blackout
Auto
Auto mode
Soun
Sound control
HLod
Hold
Display illumination
LEd
on
Display on
oFF
Display off
Display indication
dISP
No
normal display indication
Yes
Display indication reversed by 180°
PAN movement
rPAn
No
normal PAN movement
Yes
inverted PAN movement
TILT movement
rTIL
No
normal TILT movement
Yes
inverted TILT movement
Reset
rESt
No
no reset
Yes
Reset