00054285, Version 1.3
26/30
DMX address setting
With this function, you can adjust the desired DMX-address via
the Control Board.
Automatic program mode when there is no DMX signal
"Au01",
"Au02"
With this function, you can run the internal program.
This mode allows a single unit to run to a factor y installed
program in one of two speeds.
To set the fixture to auto mode Slow, select
to set the
the fixture to auto mode Fast, select
.
Sound control
Sound controlled mode when there is no DMX signal.
PAN Reverse
With this function you can reverse the PAN movement.
TILT Reverse
With this function you can reverse the TILT movement.
Reverse display
With this function you can rotate the display by 180°.
Restore factor y settings
With this function you can restore the factor y settings of the
device. All settings will be set back to the default values.
Reset
With this function you can Reset the device via the Control
Board.
