00133815, Version 1.0
23/32
INSTALLATION
WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
The device may be placed on the floor or via its bracket fastened to a truss or similar rigging structure. The
device must never be fixed swinging freely in the room.
1 The rigging structure must support at least 10 times the
weight of all fixtures to be installed on it.
2 Block access below the work area and work from a stable
platform when installing the device.
3 Use rigging hardware that is compatible with the structure
and capable of bearing the weight of the device. Please
refer to the “Accessories” section for a list of suitable
rigging hardware.
4 Secure the device with a safety bond or other secondary
attachment. This secondary safety attachment must be
sufficiently dimensioned in accordance with the latest
industrial safety regulations and constructed in a way that
no part of the installation can fall down if the main
attachment fails. Use the hole in the bracket for fixation of
the safety bond. Fasten the safety bond in such a way
that, in the event of a fall, the maximum drop distance of
the device will not exceed 20 cm.
5 To align the device, release the fixation levers at the
mounting bracket, adjust the desired inclination angle and
tighten the fixation levers.
6 After installation, the device requires inspections
periodically to prevent the possibility of corrosion,
deformation and looseness.
Summary of Contents for LED THA-100F MK3
Page 1: ......
Page 2: ...00133815 Version 1 0 2 32 ...