00113867.DOCX, Version 1.0
22/32
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.
Menu structure
The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
The main menu is accessed by pressing Menu until the display is lit. Browse through the menu by pressing
Up or Down. Press Enter in order to select the desired menu. You can change the selection by pressing Up
or Down. Press Enter in order to confirm. You can leave every mode by pressing Menu. The functions
provided are described in the following sections.
Menu
Sub menu
Function
A001
A001-A512
DMX starting address setting
C000
Color mix
C1.XX
Dimmer intensity of red LED color
00
-
99
C1
00
-C1
01
no red, C1
02
-C1
99
increasing
C2.CC
Dimmer intensity of green LED color
00
-
99
C2
00
-C2
01
no green, C2
02
-C2
99
increasing
C3.XX
Dimmer intensity of blue LED color
00-99
C3
00
-C3
01
no blue, C3
02
-C3
99
increasing
CF.XX
Strobe effect 00
-
99
CF
00
no strobe effect, CF
01
(1 Hz) - CF
99
(30 Hz) increasing
CMXX
CM.XX
Preset colors
CM01 Red
CM09 Lavender
CM02 Amber
CM10 Mauve
CM03 Warm yellow
CM11 Magenta
CM04 Yellow
CM12 Pink
CM05 Green
CM13 Warm white
CM06 Turquoise
CM14 White
CM07 Cyan
CM15 Cold White
CM08 Blue
JU00
JU.XX
Switching colors
JU00-JU99 with increasing speed
JF.XX
Strobe effect switching colors
JF00 no strobe effect, JF01 (1 Hz) - JF99 (30 Hz) increasing
FA00
FA.XX
Fading colors
FA00-FA99 with increasing speed
FF.XX
Strobe effect fading colors
FF00 no strobe effect, FF01 (1 Hz) - FF99 (30 Hz) increasing
AUTO
AU.XX
Automatic mode/internal program
AU00-AU99 with increasing speed
SLAV
Slave mode
SOUN
S0.XX
Sound control/internal program
SO00-SO99 with increasing microphone sensitivity
XCHX
X.CHX
Setting the DMX channel mode
1CH – 1 channel mode with white strobe effect
2CH1 – 2 channel mode with preset colors
2CH2 – 2 channel mode with white strobe effect
3CH1 – 3 channel mode with white strobe effect
3CH2 – 3 channel mode with preset colors and strobe effect
3CH3 – 3 channel mode, RGB
4CH – 4 channel mode
6CH – 6 channel mode
