www.eurolite.de
32
Operation with the IR Remote Control
The IR remote control allows convenient control of the integrated show programs in automatic mode or sound-controlled
mode. Press the buttons repeatedly to switch between the programs. The display indicates the current setting. When
actuating a button, always hold the remote control in the direction of the sensor at the control unit’s front or rear. There
must be visual connection between the remote control and the sensor.
Note:
Control via IR remote control not possible in DMX or slave mode.
Button
Function
Automatic Mode
Flower LEDs, Laser and Strobe LEDs
Show program AM01—AM08
Speed adjustable with 0—9
Flower LEDs
Show program AP01—AP20
Speed adjustable with 0—9
Laser
Show program AL01—AL06
Speed adjustable with 0—9
Strobe LEDs
Show program AF01—AF10
Speed adjustable with 0—9
Sound Control
Flower LEDs, Laser and Strobe LEDs
Show program SM01—SM08
Flower LEDs
Show program SP01—SP20
Laser
Show program SL01—SL06
Strobe LEDs
Show program SF01—SF10
General Functions
On/off
Switches buttons A, B and C between automatic mode and sound-controlled mode
—
Running speed of the show programs
Pause
/
Color selecting for the flower LEDs
► Battery
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery contacts
prevents the battery from being discharged during storage. Prior to the first operation remove the foil from the battery
support on the rear side of the remote control. Otherwise operation of the remote control is not possible.
If the range of the remote control decreases (3 meters as a maximum), replace the battery.
For this purpose, on the rear side of the remote control press the small bar with the groove to
the right and at the same time remove the battery support. For operation, one 3 V button cell
type CR 2025 is required. When inserting, pay attention that the positive pole of the button
cell shows upwards in the support.