00038069.DOC, Version 1.1
17/20
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
OPERATION
After you connected the effect to the mains, the device starts running.
Stand Alone operation
You can do without a controller as the device features a built-in microphone, which provides automatic sound
control. You can adjust the sensitivity with the rotary-control on the rearpanel.
Non-DMX modes
Table 1: Set operating mode via DIP-switches
Functions
DIP
1
DIP
2
DIP
3
DIP
4
DIP
5
DIP
6
DIP
7
DIP
8
DIP
9
DIP
10
Blue LEDs – colour
intensity in 3 steps
(0-100%)
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Green LEDs -
colour intensity in 3
steps (0-100%)
OFF
OFF
OFF
ON
ON
ON
OFF
OFF
OFF
OFF
Red LEDs – colour
intensity in 2 steps
(0-100%)
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
Red and green
LEDs
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
Red and blue LEDs
ON
ON
ON
OFF
OFF
OFF
ON
ON
OFF
OFF
Blue a. green LEDs
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
Strobe (red, blue
and green LEDs)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
Internal program 1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
Internal program 2
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
OFF
Internal program 3
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
Internal program 4
ON
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
Internal program 5
ON
ON
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
Internal program 6
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
OFF
Internal program 7
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
OFF
Internal program 8
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
ON
OFF
Internal program 9
ON
ON
ON
ON
ON
OFF
OFF
OFF
ON
OFF
DMX
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
Please note:
If the device is connected to a DMX-controller, it can not be controlled via DIP-switches. If the
DMX-connection is cut off, the device remains in DMX-mode.
If you wish to change from one operating mode into another, you have to unplug the device from the
mains and plug it in again.
DMX-controlled operation
The individual channels and their features are listed under DMX-protocol.
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
For DMX-controlled operation set DIP Switch 10 to ON.