No. 52200590
Welcome to Eurolite! Your new stroboscope adds fun disco feel to each party. This
product is fitted with an LED that consumes little power, has an extremely long service life
and develops little heat. Your Eurolite team wishes you much enjoyment with your new
light effect.
Please read these instructions carefully before using the product. They contain
important information for the correct use of your product. Please keep them for future
reference.
This product generates lighting effects and is intended for private use and commercial
use.
Only use the product according to the instructions given herein. Damages due to
failure to follow these operating instructions will void the warranty! We do not assume
any liability for any resulting damage.
We do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions. In such cases, the
warranty/guarantee will be null and void.
Unauthorized rebuilds or modifications of the product are not permitted for reasons of
safety and render the warranty invalid.
The product is suitable for indoor use only. Do not use it outdoors. Never expose it to
rain or moisture. Do not store it in rooms exposed to moisture.
The product is supplied with hazardous mains voltage. To reduce the risk of electric
shock, do not open any part of the product. There are no serviceable parts inside the
device.
Only connect the device to a properly installed mains outlet. The outlet must be
protected by residual current breaker (RCD). The voltage and frequency must exactly
be the same as stated on the device. If the mains cable is equipped with an earthing
contact, then it must be connected to an outlet with a protective ground. Never defeat
the protective ground of a mains cable. Failure to do so could result in damage to the
device and possibly injure the user.
Caution! Never touch the plug's contact pins shortly after unplugging the unit (danger
of electric shock).
The mains outlet must be easily accessible so that you can unplug the device quickly if
need be.
Never touch the mains plug with wet or damp hands. There is the risk of potentially
fatal electric shock.
The mains cable must not be bent or squeezed. Keep it away from hot surfaces or
sharp edges.
Never pull the mains cable to disconnect the mains plug from the mains outlet, always
seize the plug.
Unplug the device during lighting storms, when unused for long periods of time or
before cleaning.
Do not expose the device to any high temperatures, direct sunlight, dripping or
splashing water, strong vibrations or heavy mechanical stress.
Do not place any objects filled with liquids on the device.
Do not place any open sources of fire, such as burning candles, on or directly next to
the device.
Make sure that objects cannot fall into the device, in particular metal parts.
Only have repairs to the device or its mains cable carried out by qualified service
personnel. Repairs are required when the device or the mains cable is visibly
damaged, liquid has been spilled or objects have fallen into the device; when the
device has been exposed to rain or moisture, has been dropped or malfunctions occur.
This product is not a toy. Keep it out of the reach of children and pets. Do not leave
packaging material lying around carelessly.
This device may be used only by persons with sufficient physical, sensorial, and
intellectual abilities and having corresponding knowledge and experience. Other
persons may use this device only if they are supervised or instructed by a person who
is responsible for their safety.
SAFETY WARNINGS
Intended use
Danger due to electricity
Danger to children and people with restricted abilities
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Eurolite is a brand of Steinigke Showtechnic GmbH
•
Andreas-Bauer-Str. 5
•
97297 Waldbüttelbrunn, Germany
Publ. 10/2017
Warning – risk of burns and fire
Warning – risk of injuries
?
?
?
?
?
?
?
?
?
?
?
?
?
?
The admissible ambient temperature range (Ta) is -5 to +45°C. Do not operate the
device outside of this temperature range.
The housing temperature (Tc) can be up to 60°C during use. Avoid contact by persons
and materials.
Do not illuminate surfaces within 50 cm of the device. This value is indicated on the
device by the corresponding symbol.
Do not use the device near highly flammable materials. Always place the device at a
location where sufficient air circulation is ensured. Leave 50 cm of free space around
the device. Never cover the air vents of the housing.
Caution! Do not look directly at the light source. Persons with light-sensitive epilepsy
may suffer from epileptic seizures or fall unconscious.
Make sure that the product is set up or installed safely and expertly and prevented from
falling down. Comply with the standards and rules that apply in your country.
For commercial use the country-specific accident prevention regulations of the
government safety organization for electrical facilities must be complied with at all
times.
This product is designed to be mounted on a wall or ceiling. Depending on the surface,
suitable screws and dowels must be used. Make sure that the product cannot fall
down. Alternatively, you can set up the product on a level surface such as a table.
To align the device, release the two screws of the mounting bracket. Adjust the desired
inclination and fasten the screws.
To power on simply connect the product to the mains.
For auto mode turn the left dial to the left until you hear a click. Use the right dial to
adjust the desired number of flashes.
For music control turn the left dial to the right, thereby adjusting the sensitivity of the
internal microphone sensitivity to the volume of the music. Then set the right dial to the
“
MAX
“
position to generate the flashes to the beat of the music.
Cleaning of the device is limited to the surface. Only wipe off the product with a soft
lint-free and moistened cloth. Never use solvents or aggressive detergents.
Disconnect the device from power and allow it to cool before cleaning.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the
device by yourself as this may result in damage.
When to be definitively put out of operation, take the product to a local recycling
plant for a disposal which is not harmful to the environment. Devices marked
with this symbol must not be disposed of as household waste. Contact your
retailer or local authorities for more information.
Power supply:.................230 V AC, 50 Hz
Power consumption:.......12 W
LED type:........................5050 SMD weiß
Dimensions (W x D x H): ..110 x 100 x 100 mm
Weight:...........................0.2 kg
SETUP
USE
CLEANING AND MAINTENANCE
PROTECTING THE ENVIRONMENT
TECHNICAL SPECIFICATIONS
Subject to change.
LED
PARTY STROBE 36
www.eurolite.de
USER MANUAL
EN
