EuroLite LED KLS PARty, User Manual, Page: 25 / 32

00118185, Version 1.1 25/32
Stand-alone mode
In the stand-alone mode, the device can be used without controller. Disconnect the device from the
controller.
Operating buttons
MENU Selects the operating mode or returns to the initial screen.
ENTER Activates a value to be modified or saves a value when modifying.
UP Selects the next menu item or increases values when modifying.
DOWN Selects the previous menu item or decreases values when modifying.
Menu structure in Stand Alone Mode
Mode
Display
Function
DMX mode d.001
d001-493 d-20 20-channel mode
d001-505 d-08 8-channel mode
d001-508 d-05 5-channel mode
Preset colors A1.XX A1.01 ~ A1.15
Constant lighting in one of 15 colors or
color combinations
Switching colors program A2.XX A2.01 ~ A2.32 With increasing speed
Fading colors program A3.XX A3.01 ~ A3.32 With increasing speed
Sound control
A4.XX A4.01 ~ A4.03 Sound controlled programs
A4.XX A4.01 ~ A4.09 Microphone sensitivity
Strobe effect A5.XX A5.01 ~ A5.32
With increasing speed
Auto program A6.XX A6.01 ~ A6.32
With increasing speed
Chaser program A7.XX A7.01 ~ A7.32 With increasing speed
Slave SLAV Setting for slave devices
Sound control
1 Press the button MENU so many times until A4.XX appears on the display and confirm with ENTER .
2 Use the buttons UP and DOWN to select the number of the desired program ( A4.01 - A4.03 ).
3 Confirm with the ENTER button. The display indicates menu item microphone sensitivity.
4 Use the buttons UP and DOWN to adjust the microphone sensitivity of the program from A4.01 (low) to
A4.09 (high). Confirm with the ENTER button.
Interconnecting several devices (master/slave operation)
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller. The devices must be set to the corresponding
operating modes.
1 Configure all slave units before connecting the master unit: Press the MENU button so many times until
SLAV is indicated on the display. Confirm with the ENTER button.
2 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
3 Set the master unit to the desired operating mode. The interconnected devices will now operate
synchronously.