00054241.DOC, Version 1.2
22/31
4.2 Operating elements and connections
1
Microphone for sound-controlled operation
2
Sensitivity control for the microphone
3
Connector for the foot pedal FP-1
4
Fixation screw
5
LED display
6
Control buttons
• button MENU to call the menu items
• button DOWN to switch between sound control and
automatic mode
• button UP to switch to DMX operation
• buttons UP and DOWN to set the speed in automatic
mode and to set the DMX starting address
7
Jack DMX IN
DMX signal input (3-pin XLR) for connecting a controller
8
Jack DMX OUT
DMX signal input (3-pin XLR) for connection to the DMX
input of another light effect unit
9
Power
input with fuse holder
• Used to plug the supplied power cord in.
• Only replace the fuse when the device is disconnected
from mains. Only use fuses of the same rating and
power. The correct value is specified on the device.
10
LED spot 1 to 4
11
Connection cable for the control unit
12
TV pin for placing on a stand
13
Fixation screw
