Channel 7, Spot 2: Brightness red
Channel 8, Spot 2: Brightness green
Channel 9, Spot 2: Brightness blue
Channel 10, Spot 3: Brightness red
Channel 11, Spot 3: Brightness green
Channel 12, Spot 3: Brightness blue
Channel 13, Spot 4: Brightness red
Channel 14, Spot 4: Brightness green
Channel 15, Spot 4: Brightness blue
The control panel DMX LED Operator 4 available as accessory is
optimally adapted to the light set. It has four channels so that all spots of
the light set can be controlled in sync. To control the light set with the
DMX LED Operator 4 adjust the DMX starting address 021.
Operation with the DMX LED Operator 4
DMX value
Function
000 – 255
Dimming from 0 – 100%
DMX value
Function
000 – 255
Dimming from 0 – 100%
DMX value
Function
000 – 255
Dimming from 0 – 100%
DMX value
Function
000 – 255
Dimming from 0 – 100%
DMX value
Function
000 – 255
Dimming from 0 – 100%
DMX value
Function
000 – 255
Dimming from 0 – 100%
DMX value
Function
000 – 255
Dimming from 0 – 100%
www.eurolite.de
Subject to change 17.11.2010
© Copyright Reproduction prohibited!
00054466.DOC, Version 2
DMX value
Function
000 – 255
Dimming from 0 – 100%
DMX value
Function
000 – 255
Dimming from 0 – 100%
Operation via DMX controller
For operation with a controller with DMX512 protocol, the light set is
equipped with 15 control channels.
1. To be able to operate the light set with a DMX controller, the DMX
starting address must be set for the first DMX channel. For this press
the button MENU so many times until
is indicated in the
display. Then use the buttons UP and DOWN to set the address.
Note: The starting address depends upon which DMX controller is
being used. Please refer to its user manual.
2. To switch to the DMX operating mode, press the button MENU so
many times until the display indicates
or
. Then press
the button UP. The display will indicate
and after a few seconds
the light set can be operated with the DMX controller.
Channel 1, Preset programs, automatic mode, sound control
Channel 2, Master control
Channel 3, Strobe control
Channel 4, Spot 1: Brightness red or running speed
If channel 1 is set to a DMX value between 010
249, i.e. a preset
program or automatic mode is selected, channel 4 controls the running
speed:
Channel 5, Spot 1: Brightness green or fade time
If channel 1 is set to a DMX value between 010
249, i.e. a preset
program or automatic mode is selected, channel 5 controls the fade
time:
Channel 6, Spot 1: Brightness blue
Setting the DMX starting address and selecting the DMX operating
mode
DMX protocol
–
–
DMX value
Function
000 – 009
Off
010 – 029
Program 1
030 – 049
Program 2
050 – 069
Program 3
070 – 089
Program 4
090 – 109
Program 5
110 – 129
Program 6
130 – 149
Program 7
150 – 169
Program 8
170 – 189
Program 9
190 – 209
Program 10
210 – 229
Program 11
230 – 249
Automatic mode
250 – 255
Sound control
DMX value
Function
DMX value
Function
000 – 009
Off
010
255
–
Strobe slow
®
fast
DMX value
Function
000 – 255
Dimming from 0 – 100%
DMX value
Function
000 – 255
R
slow
fast
®
unning speed
DMX value
Function
000 – 255
Dimming from 0 – 100%
000 – 255
Dimming from 0 – 100%
DMX value
Function
000
No function
DMX value
Function
000 – 255
Dimming from 0 – 100%
001 – 255
Fade time slow
fast
®