22
•
EN
CONTROL VIA CABLE REMOTE CONTROL
For cable remote control operation, disconnect the DMX cable from the unit. Connect the remote control to the
jack REMOTE CONTROL. Once the green LED lights up, the machine is ready to emit fog.
Manual fog output
1
To manually activate a fog output, press the green
MANUAL
button. While this switch is
kept pressed, the unit will emit the maximum amount of fog. As soon as you release the
button, the fog output will stop.
2
With the control
OUTPUT
, adjust the fog output volume between 0 and 100 %.
The manual mode will take priority over the continuous and timer mode, i.e. when the
green button is pressed, the unit will always emit fog even if one of the other modes is
activated.
Continuous Mode
In the continuous mode, the fog machine will emit fog continuously. The output volume is
adjustable.
1
To activate the continuous mode, press the red button
CONTINOUS
, so that it will
engage.
2
With the control
OUTPUT
, adjust the fog output volume between 0 and 100 %.
3
To deactivate the continuous mode, disengage the red button
CONTINOUS
again.
The continuous mode will take priority over the timer mode, i.e. when the red button is
pressed, the unit is set to continuous mode even if the timer mode is activated with the
button timer.
Timer Mode
In the timer mode, the fog machine will automatically emit fog. The time intervals, duration
and fog volume are adjustable.
1
To activate the timer mode, press the yellow button
TIMER
so that it will engage and the
control indicator above the button starts flashing.
2
With the control
INTERVAL
,
adjust the intervals between the individual fog outputs
between 0 and 30 minutes.
3
With the control
DURATION
, adjust the duration of the fog outputs between 1 and 15
seconds.
4
With the control
OUTPUT
, adjust the fog output volume between 0 and 100 %.
5
To deactivate the timer mode, disengage the yellow button
TIMER
again. The yellow
control indicator above it will be extinguished.