
00102251.DOCX, Version 1.0
17/24
Features
PARty-on! – handy TCL LED color changer with DMX control
•
Equipped with 12 TCL LEDs in the colors red, green and blue (item 42110193)
•
Equipped with 54 TCL LEDs in the colors red, green and blue (item 42110196)
•
Flicker-free projection
•
Functions: static colors, RGB color blend, internal programs, color change with diverse settings,
dimmer and strobe settings, Master/Slave operation
•
Operable in stand-alone mode or via DMX
•
Addressing via control panel with 4-digit LED display
•
Sound-control via built-in microphone
•
Easy installation
•
Ideal for party-rooms and household use
•
Locking possibility at the mounting bracket
•
Ready for connection via power cord with Euro plug
•
Switch-mode power supply for operation between 100 and 240 volts
•
DMX512 control possible via any commercial DMX controller
INSTALLATION
Attachment
This product is designed for overhead rigging to a wall or ceiling with the mounting bracket. To align the unit,
release the fixation screws at the mounting bracket, adjust the desired inclination angle and retighten the
fixation screws. Please always make sure that the product is set up or installed securely and cannot fall
down.
Connection with the mains
Connect the device to the mains with the power plug.
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
DMX512 control
The wires must not come into contact with each other, otherwise
the devices will not work at all, or will not work properly.
Please note, the starting address depends upon which controller is being used.
Only use a DMX cable and 3-pin XLR plugs and connectors in order to connect the controller with the fixture
or one fixture with another.
Occupation of the XLR connection:
Summary of Contents for BigPARty
Page 1: ......