EuroLite AKKU UP-7 QCL Spot QuickDMX User Manual Download Page 24

 

00128199, Version 1.0 

24/40

SAFETY INSTRUCTIONS 

 

 

 

WARNING! 

 

 

Please read the safety warnings carefully and only use the product as described in this manual to 
avoid accidental injury or damage. 

 
Intended use 
• 

This  device  is  an  LED  projector  for  creating  decorative  lighting  effects.  This  device  is  designed  for 
professional use in the field of event technology, e.g. on stage. It is not suitable for household lighting. 

• 

The device can be operated with 100-240 V, 50/60 Hz mains voltage or via the integrated lithium ion 
rechargeable battery which can be recharged when connecting the device to the mains.  

• 

The integrated QuickDMX receiver for wireless reception of DMX512 signals operates in the 2.4 GHz ISM 
range and is license-free and generally approved for operation in EU and EFTA countries. 

• 

Only  use  the  device  according  to  the  instructions  given  herein.  Damages  due  to  failure  to  follow  these 
operating instructions will void the warranty! We do not assume any liability for any resulting damage. 

• 

We  do  not  assume  any  liability  for  material  and  personal  damage  caused  by  improper  use  or  non-
compliance with the safety instructions. In such cases, the warranty will be null and void. 

• 

Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the 
warranty invalid. 

 
Danger due to electricity 
• 

The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do 
not store it in rooms exposed to moisture. 

• 

To  reduce  the  risk  of  electric  shock,  do  not  open  any  part  of  the  device.  There  are  no  serviceable  parts 
inside the device.  

• 

Only  connect  the  device  to  a  properly  installed  mains  outlet.  The  outlet  must  be  protected  by  residual 
current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the 
mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective 
ground. Never deactivate the protective ground of a mains cable. Failure to do so could possibly injure the 
user. 

• 

The mains outlet must be easily accessible so that you can unplug the device quickly if need be. 

• 

Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock. 

• 

The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges. 

• 

Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug. 

• 

Unplug the device during lightning storms, when unused for long periods of time or before cleaning. 

• 

Do  not  expose  the  device  to  any  high  temperatures,  direct  sunlight,  dripping  or  splashing  water,  strong 
vibrations or heavy mechanical stress. 

• 

Do not place any objects filled with liquids on the device. 

• 

Do not place any open sources of fire, such as burning candles, on or directly next to the device. 

• 

Make sure that objects cannot fall into the device, in particular metal parts. 

• 

Only  have repairs to the device or  its mains cable carried out  by  qualified service personnel. Repairs are 
required  when  the  device  or  the  mains  cable  is  visibly  damaged,  liquid  has  been  spilled  or  objects  have 
fallen  into  the  device;  when  the  device  has  been  exposed  to  rain  or  moisture,  has  been  dropped  or 
malfunctions occur. 

• 

Cleaning of the device is  limited to the surface. Make sure that moisture does  not come into contact  with 
any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft 
lint-free and moistened cloth. Never use solvents or aggressive detergents.  

 
Danger to children and people with restricted abilities 
• 

This  product  is  not  a  toy.  Keep  it  out  of  the  reach  of  children  and  pets.  Do  not  leave  packaging  material 
lying around carelessly. Never leave this device running unattended. 

• 

This  device  may  be  used  only  by  persons  with  sufficient  physical,  sensorial,  and  intellectual  abilities  and 
having  corresponding  knowledge  and  experience.  Other  persons  may  use  this  device  only  if  they  are 
supervised or instructed by a person who is responsible for their safety. 

 

Summary of Contents for AKKU UP-7 QCL Spot QuickDMX









































Reviews: