00086062.DOC, Version 1.2
21/23
OPERATION
After you connected the spot to the mains, the device starts running.
The LED display lights up and you can choose the desired mode via the
buttons MODE, UP, DOWN and ENTER.
Press the MODE button in order to browse through the main menu.
Browse through the submenu by pressing UP or DOWN. Press the
ENTER button in order to select the desired menu.
The device features a memory function. The last program selected will begin anew when the device is
restarted.
The functions provided are described in the following sections.
MODE
UP / DOWN
FUNCTION
DMX
d001 ~ d512
Setting the DMX starting address
STATIC
COLORS
CC01 ~ CC64
Select static color
AUTO
rb01 – rb16
Color change 1 -
fading, 7 colors with increasing speed
PL01 – PL16
Color change 2 -
fading, 7 colors with increasing speed
Sd01 – Sd16
Color change 3 -
switching, 7 colors with increasing speed
FLASH
FL01 – FL16
Strobe effect with increasing speed
SOUND
Soud
Sound controlled mode
DIMMER
r000 – r255
Adjust the brightness of the red LEDs
G000 – G255
Adjust the brightness of the green LEDs
b000 – b255
Adjust the brightness of the blue LEDs
DMX-mode
The Control Board allows you, as described above, to assign the DMX channel mode and the DMX starting
address
The DMX starting address is defined as the first channel from which the device will respond to the controller.
Addressing
Press the MODE button to select the DMX mode and the display shows
d001 ~ d512
. You can select the
desired address via the UP or DOWN buttons. Press the ENTER button to confirm.
If you set, for example the address to channel 8, the fixture will use the channels 8 to 14 for control.
Please, be sure that you don’t have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX-chain. If several devises are addressed similarly, they will
work synchronically.
ENTER
MODE
UP
DOWN
