00113517, Version 1.0
36/44
USE
Several receivers may be assigned to a transmitter. It is possible to operate a maximum of 512 receivers.
Transmission 1:1
The DMX signal is fed to a transmitter which sends it via RF. A receiver with the same transmission channel
receives the RF signal and distributes it as a DMX signal.
Transmission 1:Many
The DMX signal is fed to a transmitter which sends it via RF. Several receivers with the same transmission
channel receive the RF signal and distribute it as a DMX signal.
Parallel Transmission
It is possible to operate 6 wireless DMX networks with 6 transmitters in parallel without mutual interference
by adjusting them to different transmission channels. The wireless DMX networks operate independent of
each other in 1:1 or 1: many transmission mode.
Addressing
The device has five different DMX channel modes. The Control Board allows you, as described above, to
assign the DMX channel mode.
The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the AKKU IP UP-4 QCL Spot QuickDMX will respond to the controller.
If you set, for example, the address in the 10 channel mode to channel 11, the AKKU IP UP-4 QCL Spot
QuickDMX will use the channel 11 to 20 for control.
Please, be sure that you don’t have any overlapping channels in order to control each AKKU IP UP-4 QCL
Spot QuickDMX correctly and independently from any other fixture on the DMX-chain.
If several AKKU IP UP-4 QCL Spot QuickDMX are addressed similarly, they will work synchronically.
Summary of Contents for AKKU IP UP-4 QCL SPOT
Page 1: ......
