00132514, Version 1.0
24/32
Stand-alone mode
Preset colors
In the
Stat
mode the device will constantly emit one of 19 preset colors.
1
Press the
MENU
button so many times until
Stat
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired color. Confirm with the ENTER button.
Automatic mode
In automatic mode, 9 show programs are available that run at an adjustable speed.
1
Press the
MENU
button so many times until
Auto
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program
(Au01 – Au09)
. Confirm with
the
ENTER
button.
2
Press the
MENU
button so many times until
SPEE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
SP01
(slow) to
SP09
(fast). Confirm with the
ENTER
button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
Soun
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program
(So01~So09)
. Confirm with
the
ENTER
button.
2 Press the
MENU
button so many times until
SPEE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
SP01
(slow) to
SP09
(fast). Confirm with the
ENTER
button.
3 Press the
MENU
button so many times until
SEnS
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to Adjust the microphone sensitivity to the volume of the music
(
SE01
= low,
SE09
= high).
4 If you enable the silent scene mode (
on
setting) in menu item
SILE
,
the LEDs will switch off if the volume
is too low or if there is no sufficient bass beat. If you disable this mode (
off
setting) the LEDs remain on
during periods without music.
Color mix
In the color mode
Colo
the 4in1 LED can be individually adjusted in intensity. The device will constantly emit
the set color.
1
Press the
MENU
so many times until
Colo
is indicated in the display. Confirm with the
ENTER
button.
2
Now the display indicates the letter
R
for the color red and the corresponding brightness value. Use the
buttons
UP
and
DOWN
to adjust the desired brightness.
3
Confirm with the
ENTER
button. Now the color green can be set; then blue and white until the desired
color intensity is achieved.
Total brightness
Menu item
dIMM
allows adjusting the total brightness for all stand-alone operating modes.
1
Press the
MENU
button so many times until
dIMM
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired brightness (
dl01
= dark,
dl09
= bright). Confirm
with the
ENTER
button.
Behavior at missing DMX-signal
In
DMX lost
mode the program offers different options when no DMX signal is received.
1
Press the
MENU
button repeatedly until the display shows the
DMX lost
menu. Press
ENTER
to
confirm.
2
Select the desired program with the
UP
and
DOWN
buttons (see menu structure). Confirm with
ENTER
.
Summary of Contents for 51916152
Page 31: ......
