EuroLite 51916152, User Manual

Page: 23 / 32

00132514, Version 1.0 23/32
OPERATION
Turn on the device. The display indicates the last operating mode. The operating modes can be selected by
means of the display and the control buttons. All settings remain stored even if the device is disconnected
from the mains. The device can be operated in stand-alone mode via the control board and the EUROLITE
IR-7 remote control or in DMX-controlled mode via any commercial DMX controller.
Menu structure
Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode or change values.
Confirm with ENTER .
Mode
Display
Function
DMX mode Addr
9CH d001-d512 9-channel mode and start address
6CH
d001-d512
6-channel mode and start address
5CH
d001-d512 5-channel mode and start address
4CH
d001-d512 4-channel mode and start address
3CH
d001-d512 3-channel mode and start address
Preset colors Stat 01-19 Constant lighting in one of 19 colors
Automatic mode Auto Au 01 - 09 Auto program
Sound control mode Soun So 01 - 09 Sound program
Running speed in
automatic and sound
mode
SPEE SP01 - 09
Program running speed
slow > fast
Microphone sensitivity
for sound control
SEnS SE01 - 09
Microphone sensitivity
low > high
Color mix Colo
r000-255 Red 0-100%
g000-255 Green 0-100%
b000-255 Blue 0-100%
U000-255 White 0-100%
Dimmer dIMM dl01-dl09
Total brightness
dark > bright
Silent scene SILE
on LEDs off if there is no music signal
oFF
LEDs remain on if there is no music
signal
Behavior in case of
missing DMX signal
Lost
bLac LEDs switched off
Hold Most recent DMX value is held
FuLL All LEDs 100% on
Stat Pre-selected static color 01-19
Auto
Pre-selected auto program 01-02
Slave mode SLAV Slave Slave mode
IR remote control InFr
ON IR remote control on
OFF IR remote control off
Version V1.0 V1.0 Current software version V1.0