00066178.DOC, Version 1.0
20/23
DMX OUT
DMX IN
LIGHTING CONTROL
PROTOCOL DMX-512
UP
DOWN
MODE
1: Ground
2: Signal (-)
3: Signal (+)
XLR occupation:
Control Board
The Control Board offers several features: you can run the
internal programs or set the starting address.
Browse through the main menu by pressing MODE. You can
change the selection by pressing UP or DOWN. The
functions provided are described in the following sections.
The display shuts off after 30 seconds of inactivity. With the
touch of a button it lights up again.
Setting Solid Colors
Press the MODE button to select the solid color mode. When the display shows
C
, you can select the
desired solid color via the UP or DOWN buttons (see following graphic).
Mode:
Value:
Function:
C01
Red
C02
Green
C03
Blue
C04
Cyan
C05
Magenta
C06
Yellow
C
C07
White
Internal Programs
Press the MODE button to select the internal program mode. When the display shows
P
, you can select the
desired internal program, with or without sound control, via the UP or DOWN buttons (see following graphic).
Mode:
Value:
Function:
P1
Endless loop in 7 colors,
change every 3 seconds
P2
Endless loop in 7 colors,
fade every 3 seconds
P3
Endless loop in 3 colors,
change every 3 seconds
P4
Endless loop in 3 colors,
fade every 3 seconds
P5
Endless loop in 7 colors,
via sound control
P
P6
Endless loop in 3 colors,
via sound control