1
•
EN
Thank you for purchasing this 5in1 remote control. It is designed for wireless control (2.4 GHz) of
single- and multi-colored (CCT, RGB, RGBW, RGB+CCT) LED strips in combination with the
matching 5in1 controller. The range is 20 meters.
SAFETY
INSTRUCTIONS
•
Please read these operating instructions carefully before using the product. They
contain important information for the correct use of your product. Please keep them for
future reference.
•
Only use the product according to the instructions given herein. Damages due to
failure to follow these operating instructions will void the warranty! We do not assume
any liability for any resulting damage.
•
We do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions. In such cases, the
warranty/guarantee will be null and void.
•
Unauthorized rebuilds or modifications of the product are not permitted for reasons of
safety and render the warranty invalid.
•
This product is not a toy. Keep it out of the reach of children. Do not leave packaging
material lying around carelessly.
•
Keep this device away from rain and moisture. Indoor use only.
•
Protect the product against excessive humidity and heat. The recommended
temperature is -5 to +45°C.
•
Before taking into operation, check upon possible damages. If defective, the product
must not be taken into operation.
•
This product is maintenance-free, except for occasional cleaning. You can use a
slightly dampened cloth for cleaning. Never use alcohol or solvents.
•
Maintenance and service operations are only to be carried out by authorized dealers.
SETUP
1) A wall holder and accessories are supplied with the remote control. Either mount the holder to
the wall using the adhesive strip or the screws and dowels
2) For power supply of the remote control, insert two 1.5 V AAA batteries into the battery
compartment as indicated. If the remote is not used for a longer period, please remove the
batteries to prevent damage in case of battery leakage.
3) Follow the steps in chapter Wireless Connection to pair the remote control with the 5in1
controller.
