17
Eng
lish
10. System test
11. Factory settings
With the system test, you can make a test run. This is of
particular advantage to check the unit for functionality.
To start the test, simply
press the key. The menu
item
now appears
in the display and a count-
down of 10 seconds starts.
The countdown can be
stopped with any key.
The motor then runs for 7
seconds. The motor sym-
bol rotates next to the sec-
onds display. The test run
can also be interrupted
here with any key.
Press the reset button to reset the automatic feeder to
the factory settings.
ATTENTION!
All settings will be lost.
Do not reach into the engine while it is running!
ATTENTION!
