10
TECHNICAL SPECIFICATIONS
Voltage:
120V - 60 Hz
Power:
1200 Watt
Tank capacity:
0,3 L (10 once liquid)
Cable:
5 m
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE SOLUTION
Unit will not switch on.
Ensure the power cord has been plugged into a power socket and
the outlet is switch ON.
Check the water tank is filled correctly
Try another power outlet.
Unit is not
producing steam.
Unit sprays out water from
nozzle.
Level in water tank may be too high. Check water tank and do
not overfill max 300ml (10 once liquid).
Hold in upright position. Do not turn the steamer on its side.
Unit not fully heated. Allow the unit time to heat the water.
Accessories, once
attached do not stay on.
Check that enough force has been applied to ensure the acces-
sories are secured.
Read over accessory installation steps.
Ensure that the water tank has been filled with the correct level of
water. Ensure the unit is plugged into a power outlet.
Press Steam Lever. Ensure there is no blockage, try changing
accessory.
NOTE:
Please ensure the steam cleaner has been unplugged from the power source and cooled
down before any cleaning and maintenance is carried out.
15. Always empty any excess water from water tank after each use. This operation will prolong
the life of your appliance.
16. Always ensure the unit has cooled before putting it away in a dry, cool place.
17. To ensure the highest level of operation over a long period of time, it is recommended that
the water tank be rinsed out with water at least once a month to clean any water calcifica-
tion accumulated.
Do not use vinegar or other substances to remove lime scale deposits.
18. To clean fill with one measure of water, replace cap and shake unit to loosen any lime scale
deposits. Remove cap and empty water from tank.
WARNING:
Do not immerse the steam cleaner in water.
19.
DO NOT USE WITH ANY OTHER SANITIZING OR CLEANING AGENTS. THIS PRODUCT IS DESIGNED
TO BE USED WITH CLEAN BLAST ONLY.
MAINTENANCE
Summary of Contents for MONSTER SUPERCLEAN SC20
Page 2: ...2...