Euroflex EURO-flex Quick Installation Manual Download Page 7

 

 

 

Safety 

 

 

 

Quick installation guide_Conveyor system EURO-flex Al_20221111_EN.docx 

 

 

2.4.5 

Electricians 

Electricians are persons who, as a result of their technical training, knowledge, experience and 
awareness of pertinent norms and provisions, are capable of correctly carrying out work on electrical 
systems. Electricians are capable of recognizing potential dangers independently, and consequently 
avoiding personal injury and property damage caused by electrical currents. 

All work on the electrical equipment may only be carried out by electricians. 

 
 

2.4.6 

Specialist pneumatic personnel 

Specialist pneumatic personnel are persons who, as a result of their technical training, knowledge, 
experience and awareness of pertinent norms and provisions, are capable of correctly carrying out 
work on pneumatic systems. Specialist pneumatics personnel are capable of recognizing potential 
dangers independently, and consequently avoiding personal injury and property damage caused by 
pneumatic systems. 

All work on pneumatic equipment may only be carried out by specialist pneumatic personnel. 

 
 

2.4.7 

Specialist hydraulic personnel 

Specialist hydraulic personnel are persons who, as a result of their technical training, knowledge, 
experience and awareness of pertinent norms and provisions, are capable of correctly carrying out 
work on hydraulic systems. Specialist hydraulic personnel are capable of recognizing potential 
dangers independently, and consequently avoiding personal injury and property damage caused by 
hydraulic systems. 

All work on hydraulic equipment may only be carried out by specialist hydraulic personnel. 

 
 
 

2.5 

Personal protective equipment 

Wearing personal protective equipment is an important element of safety. Missing or unsuitable 
personal protective equipment increases the risk of health damage and personal injury. 

 
 
 

2.6 

Protective enclosure/Protective cover 

The conveyor system must be equipped with a protective enclosure/cover in areas where there is a 
danger to persons. The protective enclosure/cover protects the operator and other persons from 
injuries caused by danger points inside the enclosure/cover. 

The owner is responsible for equipping the system with a protective enclosure/cover. 

 
 

 

Summary of Contents for EURO-flex
























Reviews: