Maintenance
17
Quick installation guide_Conveyor system EURO-flex Al_20221111_EN.docx
5.2
Maintenance plan
Regular maintenance and care are required for the operational safety and fault-free operation of the
system. The specifications in the maintenance plan are guide values and must be adjusted by the
owner depending on the operating conditions.
ATTENTION
Warning of material damage due to non-original spare parts!
Use of non-original spare parts can lead to defects in the conveyance goods, operational
malfunctions, loss of safety functions and damage to or destruction of components.
»
Only replace components with original spare parts from euroflex GmbH.
General
Assembly and maintenance work
Interval [Bh]
Personnel
Inspect the conveyor system for visible damage, noise
and vibration
8 (per shift)
Operating personnel
Check safety and protective devices for completeness
and function
8 (per shift)
Operating personnel
Replace defective equipment
Replace if required
Maintenance personnel
Check functionality of the operating and display elements
(buttons, switches, indicator lamps, manometers)
24 (daily)
Operating personnel
Replace defective operating and display elements
Replace if required
Maintenance personnel
Check legibility and completeness of signage
24 (daily)
Operating personnel
Clean or replace signage, if required
Clean or replace if
required
Operating personnel
Check fixing elements, retighten if required
1.000 (quarterly)
Maintenance personnel
Check the supply lines and connections for leakage
after the first 20
Maintenance personnel
24 (daily)
Maintenance personnel
Check the electrical connections for damage and firm
seating
24 (daily)
Electricians
Replace defective electrical connections
Replace if required
Electricians
Adhere to lubrication schedule
“Lubrication schedule”
(Page 16)
Maintenance personnel
Clean conveyor system
24 (daily)
Operating personnel