manualshive.com logo in svg

EUROCOM Sky X6, User Manual

The EUROCOM Sky X6, a high-performance laptop, offers unparalleled gaming and multitasking capabilities. Unlock the full potential of this remarkable device with the comprehensive User Manual, available for free download at manualshive.com. Explore its features, master its functions, and unleash the power of the EUROCOM Sky X6.

Share
Download
background image

Modules

Sound Blaster Audio 6 - 55

6

Sound Blaster Audio

Install the 

Sound Blaster AP

 to allow you to configure the audio settings to your

requirements for the best performance in games, music and movies.

Sound Blaster X-Fi MB-5 Audio AP Installation

1.

Insert the 

Device Drivers & Uti User’s Manual 

disc an attached 

DVD drive.

2. Click 

Option Drivers

 (button).

3. Click 

5.Install SBX-Fi MB 5 AP

 

> Yes

.

4. Click 

Yes 

to accept the license agreement terms.

5. Click 

Next > Full Installation

 (button).

6. Click 

Next > Finish 

to restart the computer.

Run the 

Sound Blaster X-FI MB5

 control panel from the notification area of the

taskbar (or from the item in the Start menu). Click on the tabs to access the any of
the control panel menus.

Figure 6 - 37

Sound Blaster X-Fi 

MB5 

(Taskbar 

Notification Area 

Icon)

Summary of Contents for Sky X6

































































































































































































































































































































Reviews:

No comments

Related manuals for Sky X6

Gigabyte Q2550 User Manual preview
Q2550
Brand: Gigabyte Pages: 11

Brands by name

Popular brands

Load more brands