manualshive.com logo in svg

EUROCOM sky dlx7, User Manual

Share
Download
EUROCOM sky dlx7 User Manual Download Page 253

Control Center & Flexikey®

Overview B - 7

B

TouchPad/Camera (Device) 

Click either of these buttons
to toggle the TouchPad or camera module’s power status. The icon will appear dimmed when it is off

. 

Note that

the power status of the camera module is also effected by the 

Power Mode

 selected (see 

Table B - 1, on page B

- 3

).

Caps Lock/Scroll Lock/ Number Lock/Airplane Mode

Click the button

 

to toggle the appropriate lock mode and Airplane Mode.

Left Windows Key (Gaming) 

Click 

Disable

 to disable the Windows Key on the left side of the keyboard. This may be useful if you are using

the gaming keys (

W, A, S & D

) and wish to avoid accidentally triggering menus with the Windows Key.

Headphone (Gaming) 

The headphones may be set for different effects using this menu.

Flexikey® (Gaming) 

Click the button to access the 

Flexikey® 

application. 

Summary of Contents for sky dlx7























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands