manualshive.com logo in svg

EUROCOM sky dlx7, User Manual

Share
Download
EUROCOM sky dlx7 User Manual Download Page 184

Modules

6 - 40 Bluetooth & WLAN Combo Module

6

3rd Party Bluetooth (V4.0) Combo Driver Installation

1.

Make sure the system is not in Airplane Mode

, and then insert the 

Device 

Drivers & Uti User’s Manual 

disc into an attached DVD drive. 

2.

Click

 

Option Drivers

 (button).

3.

Click

 

3.Install Combo BT Driver > Yes

.

4.

Click

 

Next

.

5.

Click

 

Finish

 to restart the computer.

6. See 

“Bluetooth Configuration in Windows” on page 6 - 42

 for configura-

tion instructions.

Intel Bluetooth Combo Driver Installation

1.

Make sure the system is not in Airplane Mode

, and then insert the 

Device 

Drivers & Uti User’s Manual 

disc into an attached DVD drive. 

2. Click 

Option Drivers

 (button).

3. Click 

3.Install Combo BT Driver > Yes

.

4. Click 

Next >

 

Next

.

5. Click in the check box to accept the license and click 

Next

.

6. Select the setup type (

Typical

 is recommended) and click 

Install

.

7. Click 

Finish

.

8. See 

“Bluetooth Configuration in Windows” on page 6 - 42

 for configura-

tion instructions.

Summary of Contents for sky dlx7























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands