EUROCOM S7 Pro User Manual Download Page 146

Page: 146 / 304

Modules

6 - 4 Setting Up SATA RAID or AHCI Mode

SATA RAID Setup Procedure - UEFA Enabled (Windows 8.1)

To configure your RAID (Redundant Array of Independent Disks) system in Strip-
ing (RAID 0) or Mirroring (RAID 1) modes (see

Table 6 - 1, on page 6 - 3

) you will

require

two

identical

hard disks or solid state drives.

You need to setup a RAID before installing your

Windows 8.1

operating system, and

you will need to prepare the following in order to do so.
==========================================================
• The

Microsoft Windows 8.1 OS DVD

• An attached external DVD drive.
• A hard disk installed in the Primary HDD bay and a

second

(identical) hard disk

installed in the Secondary HDD bay.

Two Identical solid state drives.

• The

Device Drivers & Uti User’s Manual

disc.

==========================================================

Start-up your notebook computer and press <F2>

to enter the

BIOS

Go to the

Boot

menu, select

UEFI Setting

and press <Enter> (see page

5 - 16

Set

UEFI Boot

to “

Enabled

”.

Press <Esc> to exit the menu and go to the

Advanced

menu.

Select

SATA Mode

(see page

5 - 10

), press <Enter> and select “

RAID Mode

”.

Press <F4> and <Yes> to “

Save Changes and Reset

”.

As the computer restarts press <F2>

to enter the

BIOS

again.

Go to

Intel(R) Rapid Storage Technology

(

Advanced

menu) and press <Enter>.

Summary of Contents for S7 Pro

















































































































































































































































































































Search results

Summary of Contents for S7 Pro

Reviews:

Brands by name

Popular brands

EUROCOM S7 Pro, User Manual

Search results

Summary of Contents for S7 Pro

Reviews:

Brands by name

Popular brands