EUROCOM NEPTUNE 4 User Manual Download

Page: 239 / 346

Modules

Trusted Platform Module 7 - 45

Trusted Platform Module (TPM) Driver Installation

Make sure you have enabled and activated the TPM in the BIOS before

installing the driver.

2. Insert the

Device Drivers & Uti User’s Manual

disc

into the DVD

drive.

3. Click

Option Drivers

(button).

4. Click

4.Install TPM Driver > Yes

5. Click

Next

6. Click the button to accept the license and click

Next

7. Click

Next

> Next > Install

8. Click

Finish

> Yes

to restart the computer.

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Search results

Summary of Contents for NEPTUNE 4

Reviews:

Related manuals for NEPTUNE 4

Brands by name

Popular brands

EUROCOM NEPTUNE 4, User Manual

Search results

Summary of Contents for NEPTUNE 4

Reviews:

Related manuals for NEPTUNE 4

Brands by name

Popular brands