manualshive.com logo in svg

EUROCOM NEPTUNE 4, User Manual

The EUROCOM NEPTUNE 4 is a powerful gaming laptop that promises top-notch performance. To get the most out of your device, be sure to download the User Manual for free at manualshive.com. This comprehensive manual will guide you through all the features and settings of your new laptop.

Share
Download
background image

Upgrading The Computer

6 - 4 Removing the Battery

6

Removing The Battery from Model A, B, C & D Computers

1.

Turn the computer off, remove the AC/DC adapter and turn it over.

2.

Slide the latch 

 in the direction of the arrow.

3.

Slide the latch 

 in the direction of the arrow, and hold it in place.

4.

Slide the battery in the direction of the arrow 

.

5.

Lift the battery out of the compartment 

.

Figure 6 - 1

Removing the 

Battery

(Models A, B, C & D)

1
2

3

2

4

1

3

Battery

4

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Reviews:

No comments

Related manuals for NEPTUNE 4

Brands by name

Popular brands

Load more brands